Torre 302
Comprehensive monitoring and control of the systems and infrastructure of this impressive tower, a solution involving the development of a BMS plus CCTV and access control system.
I want a smart building
The client contacted us during the construction phase with the dream of building a smart building from which all tower systems could be monitored and controlled, considering the inclusion of lighting, pumping, HVAC, forced ventilation, CO monitoring, power plant, fire detection systems, along with the CCTV system plus access control, including pedestrian access turnstiles.
Torre 302
Torre 302 is a building located on Orinoco Street in the Las Mercedes district, an infrastructure designed by the renowned architect Roberto Lampo. The building sits on an approximate 2,193 m² plot, featuring 16 basement levels for parking and services, 1 ground floor with 4 integrable commercial spaces with mezzanine, 4 above-ground parking floors, 8 office floors with 16 integrable spaces per floor, 1 small rooftop level housing elevator and air conditioning equipment, and 1 open rooftop terrace with equipment.
The supplied system
The system was designed considering that the tower would have operations personnel and security staff, so a monitoring and control center was created with divided spaces for security personnel and for the person responsible for the operation and maintenance of the tower's technical systems. Regarding the monitoring and control system, a solution based on the use of open BACnet and Modbus protocols was considered, as well as a traditional CCTV and access control system.
Improving project traction
The solutions developed helped boost the tower's commercialization based on the innovations and support for the operation and maintenance of the tower's systems.
The project in numbers
Among the most important numbers of the project, the following stand out:
- 12 monitoring and control functionalities for the different areas and systems.
- 83 controllers with BACnet, Modbus, Mbus communication capability and open to other integrations.
- 48 control panels housing network controllers and more than 2,800 network variables.
- More than 4,500 meters of cable.
- 180 IP cameras, 18 door status monitoring points and access control.
- 6 routers, 4 UPS units and countless hours of engineering, programming and installation.
If you would like more information about the product supplied, we invite you to visit the product page PEGASUS.
